Deepcoder 14B Preview GGUF

🚀 DeepCoder-14B-Preview GGUF Models

Our latest quantization method introduces precision-adaptive quantization for ultra-low-bit models (1-2 bit), offering significant improvements in accuracy and memory efficiency.

✨ Features

Ultra-Low-Bit Quantization with IQ-DynamicGate (1-2 bit)

Our latest quantization method introduces precision-adaptive quantization for ultra-low-bit models (1-2 bit), with benchmark-proven improvements on Llama-3-8B. This approach uses layer-specific strategies to preserve accuracy while maintaining extreme memory efficiency.

Benchmark Context

All tests conducted on Llama-3-8B-Instruct using:

• Standard perplexity evaluation pipeline
• 2048-token context window
• Same prompt set across all quantizations

Method

• Dynamic Precision Allocation:
  • First/Last 25% of layers → IQ4_XS (selected layers)
  • Middle 50% → IQ2_XXS/IQ3_S (increase efficiency)
• Critical Component Protection:
  • Embeddings/output layers use Q5_K
  • Reduces error propagation by 38% vs standard 1-2bit

Quantization Performance Comparison (Llama-3-8B)

Key:

• PPL = Perplexity (lower is better)
• Δ PPL = Percentage change from standard to DynamicGate
• Speed = Inference time (CPU avx2, 2048 token context)
• Size differences reflect mixed quantization overhead

Key Improvements:

• 🔥 IQ1_M shows massive 43.9% perplexity reduction (27.46 → 15.41)
• 🚀 IQ2_S cuts perplexity by 36.9% while adding only 0.2GB
• ⚡ IQ1_S maintains 39.7% better accuracy despite 1-bit quantization

Tradeoffs:

• All variants have modest size increases (0.1-0.3GB)
• Inference speeds remain comparable (<5% difference)

When to Use These Models

📌 Fitting models into GPU VRAM

✔ Memory-constrained deployments

✔ Cpu and Edge Devices where 1-2bit errors can be tolerated

✔ Research into ultra-low-bit quantization

📚 Documentation

Choosing the Right Model Format

Selecting the correct model format depends on your hardware capabilities and memory constraints.

BF16 (Brain Float 16) – Use if BF16 acceleration is available

• A 16-bit floating-point format designed for faster computation while retaining good precision.
• Provides similar dynamic range as FP32 but with lower memory usage.
• Recommended if your hardware supports BF16 acceleration (check your device's specs).
• Ideal for high-performance inference with reduced memory footprint compared to FP32.

📌 Use BF16 if:
✔ Your hardware has native BF16 support (e.g., newer GPUs, TPUs).
✔ You want higher precision while saving memory.
✔ You plan to requantize the model into another format.

📌 Avoid BF16 if:
❌ Your hardware does not support BF16 (it may fall back to FP32 and run slower).
❌ You need compatibility with older devices that lack BF16 optimization.

F16 (Float 16) – More widely supported than BF16

• A 16-bit floating-point high precision but with less of range of values than BF16.
• Works on most devices with FP16 acceleration support (including many GPUs and some CPUs).
• Slightly lower numerical precision than BF16 but generally sufficient for inference.

📌 Use F16 if:
✔ Your hardware supports FP16 but not BF16.
✔ You need a balance between speed, memory usage, and accuracy.
✔ You are running on a GPU or another device optimized for FP16 computations.

📌 Avoid F16 if:
❌ Your device lacks native FP16 support (it may run slower than expected).
❌ You have memory limitations.

Quantized Models (Q4_K, Q6_K, Q8, etc.) – For CPU & Low-VRAM Inference

Quantization reduces model size and memory usage while maintaining as much accuracy as possible.

• Lower-bit models (Q4_K) → Best for minimal memory usage, may have lower precision.
• Higher-bit models (Q6_K, Q8_0) → Better accuracy, requires more memory.

📌 Use Quantized Models if:
✔ You are running inference on a CPU and need an optimized model.
✔ Your device has low VRAM and cannot load full-precision models.
✔ You want to reduce memory footprint while keeping reasonable accuracy.

📌 Avoid Quantized Models if:
❌ You need maximum accuracy (full-precision models are better for this).
❌ Your hardware has enough VRAM for higher-precision formats (BF16/F16).

Very Low-Bit Quantization (IQ3_XS, IQ3_S, IQ3_M, Q4_K, Q4_0)

These models are optimized for extreme memory efficiency, making them ideal for low-power devices or large-scale deployments where memory is a critical constraint.

• IQ3_XS: Ultra-low-bit quantization (3-bit) with extreme memory efficiency.

  • Use case: Best for ultra-low-memory devices where even Q4_K is too large.
  • Trade-off: Lower accuracy compared to higher-bit quantizations.

• IQ3_S: Small block size for maximum memory efficiency.

  • Use case: Best for low-memory devices where IQ3_XS is too aggressive.

• IQ3_M: Medium block size for better accuracy than IQ3_S.

  • Use case: Suitable for low-memory devices where IQ3_S is too limiting.

• Q4_K: 4-bit quantization with block-wise optimization for better accuracy.

  • Use case: Best for low-memory devices where Q6_K is too large.

• Q4_0: Pure 4-bit quantization, optimized for ARM devices.

  • Use case: Best for ARM-based devices or low-memory environments.

Summary Table: Model Format Selection

Included Files & Details

DeepCoder-14B-Preview-bf16.gguf

• Model weights preserved in BF16.
• Use this if you want to requantize the model into a different format.
• Best if your device supports BF16 acceleration.

DeepCoder-14B-Preview-f16.gguf

• Model weights stored in F16.
• Use if your device supports FP16, especially if BF16 is not available.

DeepCoder-14B-Preview-bf16-q8_0.gguf

• Output & embeddings remain in BF16.
• All other layers quantized to Q8_0.
• Use if your device supports BF16 and you want a quantized version.

DeepCoder-14B-Preview-f16-q8_0.gguf

• Output & embeddings remain in F16.
• All other layers quantized to Q8_0.

DeepCoder-14B-Preview-q4_k.gguf

• Output & embeddings quantized to Q8_0.
• All other layers quantized to Q4_K.
• Good for CPU inference with limited memory.

DeepCoder-14B-Preview-q4_k_s.gguf

• Smallest Q4_K variant, using less memory at the cost of accuracy.
• Best for very low-memory setups.

DeepCoder-14B-Preview-q6_k.gguf

• Output & embeddings quantized to Q8_0.
• All other layers quantized to Q6_K .

DeepCoder-14B-Preview-q8_0.gguf

• Fully Q8 quantized model for better accuracy.
• Requires more memory but offers higher precision.

DeepCoder-14B-Preview-iq3_xs.gguf

• IQ3_XS quantization, optimized for extreme memory efficiency.
• Best for ultra-low-memory devices.

DeepCoder-14B-Preview-iq3_m.gguf

• IQ3_M quantization, offering a medium block size for better accuracy.
• Suitable for low-memory devices.

DeepCoder-14B-Preview-q4_0.gguf

• Pure Q4_0 quantization, optimized for ARM devices.
• Best for low-memory environments.
• Prefer IQ4_NL for better accuracy.

🚀 If you find these models useful

❤ Please click "Like" if you find this useful!
Help me test my AI-Powered Network Monitor Assistant with quantum-ready security checks:
👉 Free Network Monitor

💬 How to test:

1. Click the chat icon (bottom right on any page)
2. Choose an AI assistant type:
   • TurboLLM (GPT-4-mini)
   • FreeLLM (Open-source)
   • TestLLM (Experimental CPU-only)

What I’m Testing

I’m pushing the limits of small open-source models for AI network monitoring, specifically:

• Function calling against live network services
• How small can a model go while still handling:
  • Automated Nmap scans
  • Quantum-readiness checks
  • Metasploit integration

🟡 TestLLM – Current experimental model (llama.cpp on 6 CPU threads):

• ✅ Zero-configuration setup
• ⏳ 30s load time (slow inference but no API costs)
• 🔧 Help wanted! If you’re into edge-device AI, let’s collaborate!

Other Assistants

🟢 TurboLLM – Uses gpt-4-mini for:

• Real-time network diagnostics
• Automated penetration testing (Nmap/Metasploit)
• 🔑 Get more tokens by downloading our Free Network Monitor Agent

🔵 HugLLM – Open-source models (≈8B params):

• 2x more tokens than TurboLLM
• AI-powered log analysis
• 🌐 Runs on Hugging Face Inference API

💡 Example AI Commands to Test

1. "Give me info on my websites SSL certificate"
2. "Check if my server is using quantum safe encyption for communication"
3. "Run a quick Nmap vulnerability test"

📄 License

This project is licensed under the MIT License.